606 Universal Shelving System
Shelving and storage system with unmatched flexibility.
Uprights: used to create partition shelving. The uprights support these shelves and are fitted and secured to the floor and ceiling. Therefore, it is important to check the hold and tightness of the ceilings. The uprights for partition shelving cannot be fitted when there are false ceilings of any kind. In case of false ceilings, please note that the uprights can be fitted ONLY when they are close to wall, fastened through wall brackets. The uprights can be adjusted in height by 4 cm at the top and 4 cm in the lower part by adjusting the end elements. The uprights must be properly matched with the profiles. Extensions: used to increase the height of uprights. Brackets: used for wall-mounted shelving systems installed with uprights. They are necessary for wall fixing. Their use is highly recommended when shelves have to hold a great deal of weight and for all uprights that are higher than 3 m. Reinforcement crosspieces: used solely for shelving with uprights. They should be installed in every span, one for each meter of height (e.g. 3 crosspieces for 3 meters in height). Profiles: used to mount and attach shelves. To be used both for wall shelving and for uprights. The spacing of the holes for the positioning of the shelves differs in the 11 cm and 39.5 cm profiles, so one or the other should be used. In case of wall profile, please check the wall firmness in order to choose the suitable anchor. Uprights, profiles, reinforcement crosspieces and extensions: In satin-finished or matt black anodised or matt white polyester-epoxy powder coated extruded anodized aluminium. Lower and upper adjustment screw of uprights in steel. Plate in polyester-epoxy powder coated aluminum. Wall bracket in polyester-epoxy powder coated aluminium. Shelves: In satin-finished anodised aluminium sheets or matt black finish, or in polyester-epoxy powder coated aluminium, matt white. Drawer units and writing desk: In satin- finished anodised aluminium sheets or matt black finish, or in polyester-epoxy powder coated aluminium, matt white. The drawers are installed on slides with soft-close system. Cabinets: In satin- finished anodised aluminium sheets or matt black finish, or in polyester-epoxy powder coated aluminium, matt white.Door core in Class E1 MDF. Internal supports in thermoplastic material for the aluminium shelf of the unit with concealed door. Plates for uprights and wall brackets: In polyester- epoxy powder coated aluminium casting, silver, black or matt white coloured.
